Hydraulic Gate Operator - Half Tank 100

Hydraulic Gate Operator - Half Tank 100

  • A premium 240v hydraulic gate operator for residential/light commercial use
  • Maximum gate weight of 700-kg per leaf
  • Suitable for gates up to 1.8 mts each leaf
  • Can be securely locked in both positions utilising the Half Tank (AC) version – Internal hydraulic locking system
  • Self- contained unit consisting of; electric motor, fluid pump & valve block
  • Features the anti- crashing protection system, which adjusts internal working pressures to a safe level, through force adjusting by-pass valves
  • Integrated using the advanced multi-functional LRS2151 control board
  • Manual release via a ‘unique’ key in the event of power failure
  • Maximum opening degree of 120 degrees (subject to hinge location)
  • Gate stops required in both open & closed positions
  • 55 cycles per hour at a temperature of 20 degrees (outside)

Notes:
1.Gates in excess of 1.8mts – we recommend non hydraulic locking operators devices be used in conjunction with a separate mechanical locking system.
2.Maximum gate weights reflect gates without cladding & are subject to high wind conditions.
3.Duty cycles depend on gate size & installation

Product Codes: Halftank100, Halftank, HT100

Hydraulic Gate Operator - Half Tank 100 - Product Brochure Hydraulic Gate Operator - Half Tank 100 - Product Installation Manual
Product Specifications
Supply Voltage 230 Vac±5% 50/60 Hz
Motor Power 220 W
Maximum Absorbed Current 1 A
Frequency Of Use 55%
Thermal Circuit Breaker 11
Operating Temperature from -20 °C to + 55 °C
Max Leaf 6 m
Weight 11,4 kg
Protection Class IP 55
Starting Capacitor 12,5 μF
Max Thrust 640 daN
Shaft Speed 1 cm/s (pump 1 l)
Shaft Stroke 270 mm
Leaf Maximum Weight 700-kgs
Leaf Maximum Width 1.8 - 4-mtrs *
product: Hydraulic Gate Operator - Half Tank 100