Electric Gate Operator - Half Tank 200

Electric Gate Operator - Half Tank 200

  • Self-contained unit consisting of; electric motor, fluid pump & valve block
  • Maximum gate weight of 700-kg per leaf
  • Non reversible operator with a ‘unique’ key operated manual override
  • Suitable for gates up to 2.2-mts each leaf utilising the Half Tank 200 (AC) version – lnternal hydraulic locking system in both positions
  • Integrated using the advanced multi-functional LRS2151 UPD SET control board
  • Half Tank 200 (SC) version – Internal hydraulic locking system in closed position only. This version may require a locking device in the open position if exceeding 2.2-mtrs each leaf
  • Half Tank 200 (SA) version – Internal hydraulic locking system in open position only, suitable for gates up to 5-mtrs each leaf, locking device required in the closed position
  • Half Tank 200 (SB) version – No Internal hydraulic locking system, suitable for gates up to 5-mtrs each leaf, locking device required in both positions
  • Half Tank 200 versions (SA) & (SB) have greater weight capabilities for the more demanding gate lengths of 5-mtrs each leaf. External locking devices are required for these versions to ensure the gates are securely locked in both positions
  • Gate stops required in both open & closed positions
  • Features the anti- crashing protection system, which adjusts internal working pressures to a safe level, through force adjusting by-pass valves
  • 55 cycles per hour at a temperature of 20 degrees (outside)
  • Maximum opening degree of 120 degrees (subject to hinge location on all versions)

Notes:

  1. Gates in excess of 1.8mts – we recommend non hydraulic locking operators devices be used in conjunction with a separate mechanical locking system
  2. Maximum gate weights reflect gates without cladding & are subject to high wind conditions
  3. Duty cycles depend on gate size & installation

Product Codes: Halftank, HT200,HT,

Electric Gate Operator - Half Tank 200 - Product Brochure Electric Gate Operator - Half Tank 200 - Product Installation Manual
Product Specifications
Power Supply 230 Vac±5% 50/60 Hz
Motor Power 220 W
Operating Temperature from -20 °C to + 55 °C
Max Leaf 7-mtrs
Weight 13.6-kgs
Protection Class IP 55
Starting Capacitor 12,5 μF
Max Thrust 640 daN
Shaft Speed 1,5 cm/s (pump 1,5 l)
Shaft Stroke 390 mm
Operating Cycle 70
product: Electric Gate Operator - Half Tank 200